Auto Cable Accessories

If the auto cable accessoriess will be used in harsh operating environments, check the manufacturer's ip (ingres protection) rating for sealing to dust and water at various depths and operating time frames. Make sure you understand the end use environment for your auto cable accessoriess, and then compare that scenario with the details behind the manufacturer's ip rating. Most of the ip designations have specific conditions, but the ip68 rating may be defined by each manufacturer differently. When looking for a auto cable accessories with an ip68 sealing rating, inquire exactly how the manufacturer's ip68 rating is measured. A system being submerged at two meters for 24 hours has a different impact on the auto cable accessories than at 120 meters for 24 hours, but both situations can be defined as an ip68 rating.

What does the auto cable accessories housing material need to be? Can it be plastic? Can it be metal? Select the material wisely, as this may impact reliability, weight, and cost. Brass auto cable accessoriess with nickel/chrome plating are traditionally more wear resistant and have longer lifecycles than many other materials. If weight is an issue, aluminum auto cable accessoriess may be an option. Consider plastics for limited reuse and disposable applications. If you are considering plastic, ensure you conduct adequate testing to confirm it will withstand the end use application. If used in medical applications, make sure your auto cable accessories will withstand the sterilization processes used by the end customer. For aggressively corrosive environments or some food industry applications, stainless steel may be required. Don't sacrifice reliability for cost when deciding what material you select.

Now that you've investigated the electrical, termination, sealing, and material requirements, it's time to take a look at the frequency your user will connect and disconnect the device over its lifetime. If you require a very high number of mating cycles, consider a auto cable accessories with cycles. This is especially important if a failed electrical connection can put lives at risk, such as in the medical or military environments. Another requirement to have a look at is whether your auto cable accessories will be able to stay stable in harsh and extreme environments. Many auto cable accessoriess work for example well indoors, but they will lose their performance when they are used under extreme outdoor conditions.

There are some great things going on with miniaturization today, and you should take advantage of it where you can. It is possible to design in one auto cable accessories today for an application that would have needed two or three auto cable accessoriess only a year ago, but you have to be careful. Look closely at the details in each auto cable accessories, since those details become more important as the voltage and current increases. Compare models for pin size, number of pins, and functionality. Miniature auto cable accessoriess are nice packages that fit in small places, but only a few can carry power and signal. These small auto cable accessoriess are extremely difficult to terminate, so often the miniature plugs and receptacles are sold pre-wired to maintain reliability.

Once you have identified your auto cable accessories, it's time to define the raw cable and the cable assembly. Auto cable accessoriess are getting smaller all the time, so it's becoming easier to inadvertently spec a small auto cable accessories that won't work with the larger cable you would like to use. You'll have to look at both the cable and the auto cable accessories together to make sure that they compatible. If time is tight, check with your supplier to see if you can take advantage of stocked material.
Most auto cable accessories manufacturers will provide assembly services to reduce the number of vendors you have to work with. Check out the facility to see whether the company can provide you with termination only capabilities or complete over molding, sealing, and testing capabilities.