(1) Structural characteristics of stud end metal pipe joints: Automotive non-standard pipe joints are the simplest design among all metal joints. Therefore, in simple terms, stud end metal pipe joints themselves are a whole, so they only have their own part. One end of the metal pipe joint at the stud end contains threads and an O-ring. When connecting to the hydraulic pipe, the joint of the hydraulic hose can directly engage with the threaded side of the metal pipe joint at the stud end. As the engagement force increases, the O-ring will deform, thus achieving a sealing effect. When spinning, players can manually spin the car's rotating pipe joint, or they can choose machine spinning. Before installing the metal pipe joint at the stud end, only check if the O-ring is intact.
(2) The characteristics of the stud end metal pipe joint are as follows: firstly, when sealing the stud end metal pipe joint, it uses its own O-ring and does not require other sealing assistance components; Secondly, the metal pipe joints at the stud end are used in a variety of environments, and can operate in a temperature range of -20 to 223 ℃; Thirdly, it is convenient to carry. When installing the metal pipe joint at the stud end, it can be manually installed or machine installed. Even if machine installation is used, it will not involve large machines and there are not many types of machines involved. At the same time, the volume of the metal pipe joint at the stud end is also small, so the metal pipe joint at the stud end is very convenient to carry; Fourthly, it has a high cost-effectiveness. Generally, the material of stainless steel pipe joints in automobiles is stainless steel. Relatively speaking, stainless steel is relatively cheap and has good characteristics.
