In order to better ensure the use of welded joint hoses within their effective usage time, a reasonable management mode should be established to store and control the hoses. Soft management should be stored in accordance with regulations that facilitate expiration date control and the first in, first out method. However, due to various factors such as environmental temperature, sunlight exposure, etc., the expiration date of hoses and hose assemblies cannot be defined.
In China, the storage of automotive sleeve type connector hoses and hose assemblies should be carried out as much as possible in accordance with relevant standards DIN2006:2002-10. The relevant excerpt is as follows: The commonly used hoses for assembly should be within four years (counted from the date of hose production and manufacturing). The hose assembly shall be timed from the date of production and manufacturing, and its service life shall not exceed six years. Within six years here, the storage period cannot exceed two years. In addition, the version information of the relevant hose/assembly instructions of the International Maritime Organization (ISO/TR17165-2) is slightly different from a part of the DIN standard:
ISO/TR17165-2 stipulates that the validity period of hoses/hose assemblies cannot exceed ten years from the date of production and manufacturing (counted from the date of hose production and manufacturing).
If there are any doubts about the estimation of the hose after storage (such as surface cracks, rust, etc.), stability testing should be conducted as much as possible before using the mining sleeve type joint. The hose assembly is related to the stability of mechanical equipment and management personnel during use, and it should be ensured that it is used in accordance with regulations from beginning to end.
