Many users are confused about the use of plastic waterproof cable connectors when they first come into contact with them. It should be noted that if they are not careful during use, it may cause significant safety accidents. Therefore, the following precautions should be kept in mind for all users:
Before use, be sure to check the specific placement and arrangement of waterproof cable joints.
2. It is necessary to clarify several conditions for plastic waterproof cable joints. The removed cable joints should be separated and the position of the support plate should be stable.
The shell of the purchased plastic cable waterproof joint should be intact and undamaged.
After disassembling the cable joint, the front and rear sides of the cable need to be bent.
5. Stakes and positions need to be made at positions 50 to 100m away from the straight line of the cable and at turning points.
6. Cable joints, cable extremities, and oil filled cables must be securely and stably positioned to prevent leakage.
7. Coatings or fire strips need to be added at a distance of 2 to 3 meters from the cable without expenditure.
Before dismantling, it is necessary to leave a certain amount of spare length based on the total length of the cable.