Although hydraulic press connectors are also prefabricated components of connectors, they are very different from many of the prefabricated components of high-pressure hose connectors commonly encountered in automobiles. Especially for many general joints that are not suitable and are responsible for higher pressure levels, it is usually necessary to choose such joints. Here are two performance advantages of this type of joint:
Performance advantage 1: Good compressive strength performance. Because the stainless steel plate joint of the hydraulic press is made of high-quality metal composite materials, the raw material itself has excellent impact resistance. In addition, all structures of heavy-duty mechanical equipment, which are particularly important at the structural level, can have excellent compressive strength performance. This can promote the good resistance of such joints to various pressures in use, and thus have a good advantage in the application of pipe joint deadlines.
Performance advantage 2: Good fatigue relief performance. Because the raw materials and manufacturing process used for the three-way joint of the hydraulic press are excellent, and the overall design is also very unusual, this type of structure can also have excellent advantages in alleviating fatigue performance with a very high-quality structure.
That is to say, the energy performance and fatigue relief performance of hydraulic press joints are both very good. With these two performance advantages, it can promote the joint to bear relatively large pressure and be less susceptible to external forces. It is precisely because of this that this type of joint must be selected in the hydraulic transmission system of automotive rotary pipe joints, and cannot be replaced by ordinary joints.