The oil pipe joint is made of metal, and there are four main methods for metal corrosion protection, namely the performance of the material itself, the usage environment, the interface between the material and the environment, and the plan to improve corrosion. It is not economically practical to use alloys that do not lack corrosion resistance to manufacture oil pipe joints, unless there are special needs or the appearance of oil pipe joints is completely isolated from corrosive environmental factors.
In practice, this may not be feasible and may be very difficult. The improved metal structure planning can improve the impact of special situations under certain conditions, but most oil pipe joint planning cannot be completely modified, and its protective effect is very significant. Therefore, this method basically cannot solve the problem. As long as the metal interface is corroded, the appearance anti-corrosion treatment is a widely used method.
The anti-corrosion treatment of the surface of oil pipe joints refers to the use of various methods to apply a protective layer to the metal surface. Its function is to isolate the metal from the corrosive environment, prevent corrosion from occurring, or reduce the contact between the corrosive medium and the metal surface. Intended to avoid or reduce corrosion.
The protective layer should meet the following requirements: 1. Corrosion resistance, wear resistance, and high hardness; 2. Dense organization, no defects, and small pores; 3. Firm, with strong adhesion to the substrate; 4. Evenly distributed and thick.
The protective layer of oil pipe joints is usually divided into two types: metal coating and non-metallic coating. Metal coating refers to the use of highly corrosion-resistant metals or alloys to form a protective layer on the surface of easily corrosive metals. This coating is also known as electroplating.
There are many methods and varieties of metal coatings. Electroplating is a commonly used method, followed by molten metal immersion plating (hot dip plating and chemical surface treatment). Non metallic coating refers to the use of organic polymer materials such as paint and inorganic materials on pipes, such as ceramic joints or the formation of a protective layer on the surface of stainless steel parts, which can insulate the substrate from environmental media and prevent corrosion of oil pipe joints due to contact with standard stainless steel media.
