The installation of metal material hoses is crucial. When connecting such hoses, it is necessary to pay attention to the welding and welding parts of the metal hose joints, and conduct post inspection. It is likely that some contact with the joints will occur in daily applications.
So what factors are causing the problem of ineffective metal hose joints? Insufficient bending stiffness causes difficulties. If a portion of the bending stiffness of the external connection of the joint is not standardized, there is no doubt that it will cause ineffective sealing. Therefore, when conducting metal material hose joint connections, it is necessary to test the aspect ratio. Especially if used for a long time, it is likely to cause fatigue and deformation, which will gradually reduce the actual sealing effect and also lead to the problem of leakage. Therefore, it is suggested that the inspection of the hose joint level should be carried out on time. If there is indeed an invalid situation, it is necessary to immediately carry out subsequent modifications. If there is a problem with the sealing anchor bolt of the joint, if it is due to the metal material hose joint sealing anchor bolt itself not being tightened, resulting in ineffective sealing, in fact, only the installation must be carried out again. It is suggested that before installing such hoses, it is necessary to determine the operating specifications, and the sealing anchor bolt must be tightened to ensure that future applications are not endangered, And it is necessary to do a good job in testing, especially when the interior is liquid. As a metal hose joint factory, it is necessary to conduct sealing inspections and conduct inspections on time to prevent leakage and safety risks afterwards.
